Carrier Access Broadmore 1750 User Manual
Page 361
Broadmore 1750 - Release 4.6
12-43
SNMP
Configuration
Notify Profiles
NOTE:
Selecting Validate Table will check that each Parameter Name
in this table exists in the Target Parameters table.
The only reason for this table is to allow more than one notify filter with the same
Profile Name and different subtree, so that “profile_name” + “subtree” is the key into
the Notify Filter table. When a “profile_name” is found in the Notify Profiles table, the
Notify Filter table is searched for all entries having the same “profile_name”.
The following table describes the selections.
Item
Options
Comments
Profile Name
string
Value for Profile Name, 1 to 30 characters.
Parameter Name
string
Value for Parameter Name, 1 to 30 characters.
Note: This entry must agree with the Parameters
Name in the Target Parameters table (see “Target
Parameters” on page
Enabled
Enabled
Disabled
Enables/disables this profile.
Storage
Volatile
Non-volatile
Permanent
Readonly
Other
Settings lost without power.
Settings remembered after reboot.
Settings can not be deleted.
Settings can not be changed.