Carrier Access Broadmore 1750 - Manual (Page 167)

Broadmore 1750 - Release 4.6 7-53
Configuration
Structured DS3 SAM
Table 7-9: Structured DS3 SAM Alarms
Automatic FEAC
Alarms Activate/Deactivate Activates or deactivates Far End Alarm and Control
Channel (FEAC) alarms. FEAC alarms can only be active
when the port is configured for C-bit parity framing.
Activate to detect and transmit RAI as applicable and detect
FEAC channel activate/deactivate commands
Service FEAC
Loopback Activate/Deactivate Activate sends a FEAC command to the far end service
equipment to go into service loopback. Deactivate sends a
FEAC command to go out of service loopback. Only active
when port is configured for C-bit parity.
Service AIS Activate/Deactivate Sends Alarm Indication Signal to the connected local
service equipment when activated.
Service Alarms Options
LOS Ignore/Major/Minor
LOF Ignore/Major/Minor
AIS Ignore/Major/Minor
Idle Ignore/Major/Minor
RAI Ignore/Major/Minor
FEAC Ignore/Major/Minor
Line Code Violation Ignore/Major/Minor
Excessive F-bit Errors Ignore/Major/Minor
Excessive Parity Errors Ignore/Major/Minor
Excessive C-bit Errors Ignore/Major/Minor
Excessive FEBE Errors Ignore/Major/Minor
Item Options Description