Carrier Access Broadmore 1750 - Manual (Page 360)

12-42 Broadmore 1750 - Release 4.6
SNMP Configuration
Notify Profiles
Notify Profiles
Entries may be completely maintained using the cammi Notification Profiles table
(which is a direct representation of “snmpNotifyFilterProfileTable”) or via a remote
SNMP manager. This table allows finer grained control over trap reports. Broadmore
permits up to 20 entries in this table. An empty table is acceptable.
These settings can only be accessed and changed by a SuperUser.
Select System Management
↵
Select Configuration
↵
Select System Services
↵
Select SNMP Configure
↵
Select one of the following:
* Edit
↵,
edit the Profile information
* Copy
↵,
(to put a copy of the information into the list)
* Delete
↵
, delete an existing Profile
* New
↵,
enter a new Profile
With each selection, confirm your changes and press Esc to exit.
Select Notify Profiles
↵
* Validate Table
↵,
check table entries for consistency