Carrier Access Broadmore 1750 - Manual (Page 100)

6-2 Broadmore 1750 - Release 4.6
Electrical Installation
Precautions
Precautions
WARNING! T HE B ROADMORE 1750 IS INTENDED FOR INDOOR
INSTALLATION ONLY . A PROPER CHASSIS GROUND CONNECTION IS
REQUIRED . I TS ELECTRICAL COMMUNICATIONS INTERFACES SHALL NOT
BE CONNECTED TO WIRING SYSTEMS THAT LEAVE THE BUILDING UNLESS
APPROPRIATE INTERFACE DEVICES ARE USED . T HE INSTALLER SHALL BE
RESPONSIBLE FOR PROVIDING ADEQUATE LIGHTNING OR SURGE
PROTECTION FOR WIRING THAT LEAVES THE BUILDING . T HE INSTALLER
SHALL BE RESPONSIBLE FOR PROVIDING APPROVED INTERFACE DEVICES
IF CONNECTIONS ARE MADE TO P UBLIC C OMMUNICATIONS N ETWORKS .
WARNING! T HE FRONT AND REAR COVERS OF THE CHASSIS SHOULD
ONLY BE REMOVED FOR MODULE INSTALLATION AND MAINTENANCE AS
REQUIRED . T HE COVERS SHOULD BE REPLACED AS SOON AS POSSIBLE
AFTER SUCH TASKS ARE COMPLETED .
WARNING! T HE B ROADMORE CONTAINS CIRCUIT CARDS AND
COMPONENTS THAT ARE SUBJECT TO DAMAGE BY ELECTROSTATIC
DISCHARGE (ESD). W EAR A WRIST GROUNDING STRAP AND ATTACH IT
TO AN ESD CONNECTOR OR A METAL PART OF THE SYSTEM UNIT BEFORE
HANDLING COMPONENTS . I F A WRIST STRAP IS NOT AVAILABLE , MAINTAIN
CONTACT WITH THE SYSTEM UNIT THROUGHOUT ANY PROCEDURE
REQUIRING ESD PROTECTION .
NOTE: After installation is complete, ensure that blank panels cover all
empty module slots to provide proper cooling when the fan is turned on.