System clock, System clock -7 – Carrier Access Broadmore 1750 User Manual
Page 251
Broadmore 1750 - Release 4.6
10-7
Security
Management
System Clock
System Clock
The Broadmore CPU system clock provides the time and date stamp used for system
logs, events, and audit trails. A SuperUser must set the system clock either manually
after powering up the Broadmore or configure the Broadmore to use a network timing
source (see “Network Time Protocol” on page
Select Set System Time from the Administration menu. Then set the Month, Day, Year,
Hour, and Minute to the correct values. When finished, press Escape and select Yes to
change the system clock.
NOTE:
Changing the system clock is an event recorded in the system
log (see “System Log” on page
10-15
).