Carrier Access Broadmore 1750 - Manual (Page 352)

12-34 Broadmore 1750 - Release 4.6
SNMP Configuration
Targets
The following table describes the selections.
Item Options Comments
Target Name A unique value for Target Name, 1 to 30
characters.
IP Address Format xxx.xxx.xxx.xxx
where xxx is a decimal number, 0 to 255
Port A number between 1024 and 65535.
Parameter Name A unique value for Parameter Name, 1 to 30
characters.
Trap Tag A unique value for Trap Tag, 1 to 30 characters.
Enabled Enabled
Disabled Enables/disables this target.
Storage Volatile
Non-volatile
Permanent
Readonly
Other Settings lost without power.
Settings can be changed.
Settings can not be deleted.
Settings can not be changed.
Timeout (secs*100) Enter Timeout as a value in hundredths of a
second. For example, 1500 represents 15 seconds.
This value indicates the expected maximum round
trip time for communicating with the IP address
defined by this target. When a message is sent to
this address, and a response (if one is expected) is
not received within this time period, it may
assumed that the response will not be delivered.
Retries The number of times to attempt sending the
notification.
Max Message Size TBD