Carrier Access Broadmore 1750 - Manual (Page 277)

Broadmore 1750 - Release 4.6 11-11
Security Management (FIPS Mode)
Logging in with SecurID Enabled
Logging in with SecurID Enabled
The following example uses SecureCRT as the secure client software.
To log into the RSA SecurID server:
1. Open SecureCRT. The Quick Connect window opens.
2. Select ssh2 from the Protocol pull-down menu.
3. Type in the Hostname and Username. The Hostname is the IP address of the
Broadmore, and the Username is the SecurID user name that is configured on
the RSA SecurID server with a token assigned to it.
4. Select Keyboard Interactive from the Primary pull-down menu in the
Authentication panel.
5. Click Connect.