AERCO C-More Controls Manual June 2010 - Manual (Page 83)

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
04/22/14 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 Page 83 of 162
OMM-0032_0E Phone: 800-526-0288 GF-112
6.3.6 Sensor Log Int
The Sensor Log Interval function permits the user to set the interval at which sensor readings
are recorded and stored in memory. By default, this option is set to OFF. However, if desired,
the Sensor Log Interval can be enabled and set to values ranging from 1 minute to 24 hours.
1.
Press the ▲ or ▼ arrow key until Sensor Log Int Off is displayed.
2. Press the CHANGE key. Sensor Log Int will begin to flash.
3.
Press the ▲ arrow key until the desired interval is displayed. The available choices
are:
(a) 1 Min
(b) 5 Min
(c) 15 Min
(d) 30 Min
(e) 1 hr
(f) 6 hrs
(g) 12 hrs
(h) 24 hrs
4. With the desired interval displayed, press ENTER to store the selection in memory.
5. Press BACK to exit the Sensor Log Int function.