AERCO C-More Controls Manual June 2010 - Manual (Page 131)

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
04/22/14 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 Page 131 of 162
OMM-0032_0E Phone: 800-526-0288 GF-112
Option 5 – Continued
On MASTER only:
3. Go to the BST Setpoint item and enter the Failsafe Setpoint.
4. Go to the BST Setup Menu item and set to Enabled.
5. Go to the BST Setpoint Mode item and select Remote Setpoint.
6. Go to the Head Temp Source item and select FFWD Temp.
7. Go to the BST Remote Signal and select either 4-20ma or 0-20ma.
When ALL C-More units have been configured:
7. Go to the BST Menu of the desired Master unit and set the BST Mode item to BST
MASTER.