AERCO C-More Controls Manual June 2010 - Manual (Page 26)

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
Page 26 of 162 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 04/22/14
GF-112 Phone: 800-526-0288 OMM-0032_0E
2.7 Boiler Sequencing Technology (BST) Menu
See Chapter 9.
2.8 TUNING MENU
The Tuning Menu items in Table 2-5 are factory set for each individual unit. Do not change
these menu entries unless specifically requested to do so by factory-trained personnel.
NOTE
The Breakpoint Menu items shown in Table 2-5 with an asterisk
are displayed only if Unit Type = Water Heater and the Heatr Bkpt
Dsp option in the Calibration Menu (Table 2-6) is Enabled. These
Breakpoint values correspond to a 130°F default setpoint.