AERCO C-More Controls Manual June 2010 - Manual (Page 75)

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
04/22/14 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 Page 75 of 162
OMM-0032_0E Phone: 800-526-0288 GF-112
6. After 2 seconds of continuous flame, Flame Proven will be displayed and the flame
strength will be indicated. After 5 seconds, the current date and time will be displayed
in place of the flame strength.
7. With the unit firing properly, it will be controlled by the temperature controller circuitry.
The VALVE POSITION will be continuously displayed on the front panel bargraph.
8. Once the demand for heat has been satisfied, the Control Box will turn off the gas
valve. The blower relay will be deactivated and the Air/Fuel Valve will be closed.
Standby will be displayed.
B
U
R
N
E
R
B
L
O
W
E
R
DIAL
(DETAIL “A”)
STEPPER
MOTOR
DETAIL "A"
25
Figure 5-5: KC1000 Air/Fuel Valve In Ignition Position