C-more controller for benchmark, innovation & kc – AERCO C-More Controls Manual June 2010 User Manual
Page 73

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
04/22/14
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913
Page 73 of 162
OMM-0032_0E
Phone: 800-526-0288
GF-112
Figure 5-2: Proof of Closure Switch
3. With all required safety switches closed, a purge cycle will be initiated and the following
events will occur:
(a)
Blower relay energizes and turns on blower.
(b)
Air/Fuel Valve rotates to the full-open purge position and closes purge position
switch. The dial on the Air/Fuel Valve (Figure 5-3) will read 100 to indicate that
the valve is full-open (100%).
(c)
The VALVE POSITION bargraph will show 100%.
NOTE
The Air/Fuel Valves shown in Figures 5-3 and 5-5 are used on KC
Series units. Although slight physical differences exist between
the Air/Fuel Valves used on Benchmark Series units, the valves
are functionally identical.