AERCO C-More Controls Manual June 2010 - Manual (Page 112)

C-More Controller for Benchmark, Innovation & KC
USER MANUAL
Page 112 of 162 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 04/22/14
GF-112 Phone: 800-526-0288 OMM-0032_0E
This item displays the number of Comm errors on each Comm port (slave Unit). If no valid
address is entered for a slave unit, the display will read “-” for that address. The Max number of
error count is 9.
1 BST Unit 8
This item displays eight characters representing the status of each of the possible eight units on
the network.
Symbol Explanation
1 ON
0 Off
- Offline
* Not Available
S Setpoint Limiting is active
A Lead unit
B Lag Unit
a Lead Off
b Lag Off
Example of
1 BST Unit 8 display:
1 BST Units 8
A b 0 1 S * - -
Unit #1 is the Lead
Unit and is Ignited
Unit #2 is the Lag
Unit and is Off
Unit #3 is Off
Unit #4 is Ignited
Unit #5 is ignited
and is in Setpoint
Limiting Mode
Unit #6 is either
disabled or Faulted
Units #7 & 8 are
not installed or
connected to the
MODbus network