KEYENCE LV-N10 Series User Manual

Page 71

4-4 Display Settings (diSP)

Set

tings
for Ad

van
c

ed Fu

nct
ion
s

4-23

- Digital Laser Sensor LV-N10 Series User's Manual -

Displaying a sub display

After selecting the
desired sub-screen dis-
play, press the [MODE]
button twice in the normal
display state (setting
value / received light
intensity).
Press the [MODE] button
once again to return to
the normal display.

Extension display

The received light intensity usually displayed with 4 digits can be extended to a 5-digit
display.
The maximum received light intensity value which can be displayed differs according

to the power mode and display gain. Refer to

"Display Gain" (page 4-30) for more

details.

• The upper limit of the setting value remains a 4-digit value (9999). A

larger value cannot be set.

• Each preset function, zero shift function, and each calibration function

cannot be used during the extension display.

• The received light intensity calibrated with each preset function, zero shift

function, each DATUM mode or edge detection mode is not applied on
the extended display.

Bar display

Received light intensity can be displayed as a
bar graph.
Bars are displayed in real time in the range of
85% to 115% at intervals of 5%, where 100%
is the setting value.
Up to 8 bars are displayed.

Setting value/

Received light intensity

Select L-on/D-on

Sub display

MODE

No operation for 3

sec or more

Refer to page 4-2 "Display Settings (diSP)" for setting methods.

Reference

Refer to page 4-2 "Display Settings (diSP)" for setting methods.

Display example

If the setting value is 1000: