KEYENCE LV-N10 Series - Manual (Page 70)

4
Set
tings
for Ad
van
c
ed Fu
nct
ion
s
4-22 - Digital Laser Sensor LV-N10 Series User's Manual -
4-4
Display Settings (diSP)
The current value and setting value
displays can be inverted.
In addition to the received light intensity and setting value, the following information
can be displayed on the sub display.
Yes: Operation is possible. No: Operation is not possible.
*1 For external calibration, the [SET] button can be operated to set values up to "9999".
*2 The displayed value is that before each preset function or zero shift function is executed.
*3 If the detection mode is set to DATUM1 mode or DATUM2 mode, the value before
DATUM correction is displayed.
*4 If the detection mode is set to DATUM1 mode or DATUM2 mode, the excess gain
hold display cannot be selected.
*5 If the detection mode is set to the area detection mode, rising edge detection mode,
falling edge detection mode, or when the LV-S31 is connected, no/nC is displayed.
*6 When set to the edge detection mode, bar display, excess gain display, and excess
gain hold display cannot be selected.
Display Reverse
Refer to page 4-2 "Display Settings (diSP)" for setting methods.
Display Function
oFF(OFF) Normal display (Default)
on(ON) Reversed display
Normal display
Reversed display
Sub Display
Refer to page 4-2 "Display Settings (diSP)" for setting methods.
Display Information
Operation
buttons Reference
page
[SET]
oFF (OFF)
No sub display (Setting value /
received light intensity) (Default)
Yes Yes -
StdE
(Extension)
*2
Extension display (Displaying up to
5 digits)
No
*1 No 4-23
bAr (Bar)
*6
Bar display (Bar excess gain / received
light intensity)
Yes Yes 4-23
PEr (Percent)
*6
Excess gain(%) display (Bar excess
gain / excess gain)
Yes Yes 4-24
HLd (Hold)
*3
Received-light intensity hold display
(5 types selectable)
Yes No 4-24
HLdP
(Percent Hold)
*4*6
Excess gain hold(%) display (5 types
selectable)
Yes No 4-26
Ldon (L-on/D-on) L-on / D-on display ( no / nC display)
*5 Yes No 4-26