KEYENCE LV-N10 Series - Manual (Page 3)

1 96129E
Safety Precautions
General Precautions
• This product is only intended to detect objects. Do not use this
product for the purpose of protecting a human body or a part of
the human body.
• This product is not intended for use as an explosion-proof prod-
uct. Do not use this product in a hazardous location and/or
potentially explosive atmosphere.
• This product uses DC power. Do not apply AC power. The prod-
uct may explode or burn if an AC voltage is applied.
• Do not wire the amplifier line along with power lines or high-ten-
sion lines, as the sensor may malfunction or be damaged due to
noise.
• When using a commercially available switching regulator,
ground the frame ground terminal and ground terminal.
• Do not use the LV-N10 Series outdoors, or in a place where
extraneous light can enter the light-receiving element directly.
• Due to individual dispersion characteristics and the difference
in sensor head models, the maximum sensing distance or dis-
played value may not be the same on all units.
WARNING
NOTICE
Safety Precautions on Laser Product
• This product uses a semiconductor laser for the light source.
• Use of controls or adjustments or performance or procedures
other than those specified herein may result in hazardous radia-
tion exposure.
• Follow the instructions mentioned in this manual. Otherwise,
injury to the human body (eyes and skin) may result.
Precautions on Class 1 laser products
• Do not stare into the beam.
• Do not disassemble this product. Laser emission from this
product is not automatically stopped when it is disassembled.
WARNING
Model
LV-NH32/NH35/NH37/
NH42/NH62/NH100/
NH110/NH300
LV-S31/S41/S41L/S61/
S71/S72
LV-S62/S63
Wavelength 660 nm 655 nm 660 nm
Output 310 øW 290 øW
FDA (CDRH) Part 1040.10
* Class 1 laser product
IEC 60825-1 Class 1 laser product