KEYENCE LV-N10 Series - Manual (Page 11)

1-1 Checking the Package Contents
1
Bef
o
re
U
s
in
g
1-3 - Digital Laser Sensor LV-N10 Series User's Manual -
* There is a bar LED monitor on the sensor head LV-NH32/NH35/NH37/NH42/
NH62/NH100/NH110/NH300.
With the 2-output type sensor amplifier, if the channel switch is set to 1, the output 1
excess gain is shown. If set to 2, the output 2 excess gain is shown.
LV-NH300
* LV-S31
Receiver (R) Transmitter (T)
Gray cable Black cable
F
F
N
J
N
Operation
indicator (red)
FAR indicator
(red)
JUST (center)
indicator (green)
NEAR
indicator (red)
Transmitter
Adjustment
trimmer
Receiver
Adjustment
screwdriver
Mounting bracket set
Mounting bracket × 1
Plate nut × 1
M3 × 15 screw × 2
LV-S41/S41L
Transmitter/
Receiver
Operation
indicator
(red)
LV-S61
Reflector
(R-6) × 1
Mounting bracket × 1
Plate nut × 1
M2 × 12 screw × 2
Mounting
bracket set
Receiver Transmitter
Receiver
Operation
indicator
(red)
Mounting
bracket × 1
Operation
indicator
(red)
Transmitter
LV-S62 LV-S63
Transmitter/
Receiver
Operation
indicator
(red)
Reflector
(R-9) × 1
L-mounting bracket × 1
M4 nut × 3
M4 × 30 screw × 3
Mounting
bracket set
Spot selection switch
Transmitter/
Receiver
Operation indicator
(red)
Reflector (R-6L) × 1
LV-S71/S72
Operation indicator (red)
Transmitter
Receiver Œ30
Nut × 4
Spacer × 2
Washer × 2
Mounting bracket × 2 Beam axis
alignment plate × 1
If stable light reception or stable blocking is disabled
because of the surrounding environment or changes
in the workpiece, readjust the sensitivity.
Turns ON according to
the received light intensity
with respect to the set
value.
The stability level of the
current detection is
displayed.
Bar LED Monitor
(Sequenced with sensor amplifier)
Bar LED monitor
excess gain display
Stable light
reception +10%
and higher
-10%
and higher
Setting
value
Stable
blocking