Multi-site connection, Multi site connection – Panasonic WV-CU20 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

■ Multi-Site Connection

The Multi-site connection enables you to monitor the same image at a maximum of 4 Control sites. A Remote site can transmit

images up to 4 Control sites.

Camera selection and camera control is made by only one Control site at a time. This results in a sudden change of monitoring

image in the site that did not operate the camera.

Another Remote site may call the Control site that is in communication with the currently connected Remote site. You can

select operations from options such as ACCEPT or REJECT at the Control site. See page 37 for detailed operations. Access
from the Control site is available as far as the Remote site is connected with less than 4 Control sites. Refer to Appendix for
the right of the control.

Remote Site 1