Cd wj-nt204 camera select, Input from frame switcher, Alarm list (wj-nt204) – Panasonic WV-CU20 User Manual

Page 117: Camera control buttons, Status window, Alarm reset, Wj-nt204 camera preset registration, S iml

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

i! J.W. -»*'Va it

^'~~-mY

.7^-

.....

-77^

....

PAXTH-r

WE>E

TELI.

i^AT.

AtrrO

CL'jFE

open

pieet

”

OFF

|V........ -.i

00^ !

lid.

iij

[ZJ □

fm\

S iMl

"S*:;isS'Ss

-©

-®

WJ-NT204 CAMERA SELECT

These buttons select the input to VIDEO IN 1-4 on the
WJ-NT204 to display it in the Image Display area,

® INPUT from FRAME SWITCHER

Displays the image supplied from the video multiplexer,

and opens the 16-button panel \where you can select
the input to the video multiplexer.

ALARM LIST (WJ-NT204)

Opens the alarm list activated on the WJ-NT204 trans
mitter.

® CAMERA CONTROL Buttons

Controls the Combination camera designated \with WJ-

NT204 CAMERA SELECT button for pan/tilt, zoom,

focus and auto-pan.

® Status Window

Displays alarm information when an alarm is activated.

® Image Display

Displays the camera image or multiscreen.

® ALARM RESET

Resets the alarm mode.

® WJ-NT204 CAMERA PRESET REGISTRATION

Registers the presently displayed image position of the
camera connected to the WJ-NT204. Manipulate the
camera to the desired position, then select the preset
number with the pull-down button. Click the SET button

to register the position.

117