Panasonic WV-CU20 - Manual (Page 16)

Escape Button [ESC]
This button is used to escape and execute the currently
highlighted setting on the setup menu. The monitor
screen will then return to the previous setup menu.
Direction Buttons [ < A k W ]
These buttons are used to control the pan/tilt head in
the normal operations when the Combination Cameras
are connected to the transmitter.
Menu Button [MENU]
This button is used to open or close the setup menu on
the monitor screen.
Audio Mute Button [AUDIO MUTE]
This button is used to mute the outgoing sound from the
local site.
Pressing it again will restore the sound.
Enter Button [ENTER]
This button is used to confirm the selection in the setup
menu or to open the submenu where more details are
set.
Camera Control Buttons
These buttons are used to operate the zoom/focus lens­
es capable of remote control if they are mounted on the
cameras.
TELE/WIDE: Zooms in or out the image.
NEAR/FAR: Adjusts the focus.
AF: Focusing is automated and adjusted to the best
position thanks to the built-in circuitry.
Connection Port
This port is used to connect with the REMOTE port on
the rear of the WJ-NT204 Network Interface Unit.
To connect to the unit, use a 6-conductor modular
cable supplied as an accessory with the controller.
16