Panasonic WV-CU20 - Manual (Page 59)

2. Enter "ООО" with the numeric button, and press the
ENTER, then press the CALL. The dialog appears.
Another way to start the sequence is tp press the one-
touch button that is assigned to "ООО" the start of the
sequence.
■SEQ. DIALIHQ
QUICK#001 Trans.01
COHMECTIMO
001/005
DIAb/BSC: QUIT AHD DIAL NEXT SITE
The sequential dialing starts to let the Control site view
the images sequentially. The sequence will skip to the
next when the called site is busy or does not respond
for more than 150 seconds.
3. Press the VIDEO AUTO/MANUAL, (ONE-TOUCH DIAL
4} button when you want to keep viewing the current
site. Press it again to go back to the sequence.
4. Hold down the DIAL button for 2 seconds to terminate
the sequence dialing.
When the inquiry dialog appears, select YES or NO
with the or ► button, then press the ENTER.
YES: Ends the sequence dialing.
NO: Continues the sequence dialing.
■ To Receive a Call
Receiving operation is made manually or automatically fol­
lowing the setup in the 200 RECEIVING REGI. menu,
# Manual Reception
The "RECEIVE A CALL?" dialog appears when there is a
call to the unit. The dialog shows a caller number in either
way: a quick dial number and site name if it is registered, or
simply an IP address if not registered.
1. Press the DIAL button to accept, or the ESC button to
cancel it.
There is another way of operation. Move the cursor to
YES or NO, then press the ENTER button.
When YES is selected, communication starts, then
audio and video is received.
2. Hold down the DIAL to terminate the call,
59