Panasonic WV-CU20 - Manual (Page 55)

• Dialog Screen
There are several dialogs that appear during normal opera­
tions: YES/NO inquiry, etc. The major operations are
explained on the bottom half of the screen. For further
details, see MAJOR CONTROLS AND THEIR FUNCTIONS.
■DIRECT DIAL
IF ADDRESS:
ENTER IF ADDRESS,THEN FRESS CALL
KEY,DIALING.
<~>:MOVE CALL:CALL DEL:HO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL;REDIAL NO. DIAL/ESC:CLEAR
1. Press the DIAL button.
The DIRECT DIAL dialog appears.
■DIRECT DIAL
IF ADDRESS:
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
<—»;HOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
2. Enter the IP address of the site you wish to call, with the
numeric buttons.
■ To Call a Site
There are some dialing methods to call a site.
1. Direct entry of the destination IP address with the
numeric buttons
2. Using the registered Quick dialing directory
3. Using the registered One-touch dialing directory
4. Sequential dialing in the preset order
• Direct Dialing
This is the most basic way to call a site.
■DIRECT DIAL
IP ADDRESS:
192.168. 0. 11
ENTER IP ADDRESS,THEN FRESS CALL
KEY,DIALING.
f-^:HOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL;REDIAL NO. DIAL/ESC:CLEAR
3 When you entered a wrong number, press the DELETE
button. The number followed by the cursor will be
erased.
4. Press the CALL button. The dialog screen changes to
"CONNECTING" and the unit starts dialing.
4
3
■DIRECT DIALING
IP ADDRESS:
192.168. 0.
CONNECTING
11
DIAL/ESC:CANCEL
55