Panasonic WV-CU20 - Manual (Page 76)

Main Page (with Camera Controi)
This page appears when a user authorized level 2 or higher made access, and the MODE SETUP is set as follows.
MODE SETUP
CAM CONTROL; OTHERS
AUX SYSTEM: NT204
Random Input Selection Mode
Ip JXr[
pmncittvit
U4
WIDE
SHM
tele " .pioi' If IIEA?.” ' autci 17L03E I OPEN . reset ”■ ON ^ OFF
pSj gil
q I i EI] m M HI liil r~i i
® INPUT SELECT CD
These buttons are used to switch images of up to four
cameras.
(D PRESET SELECT
To move the combination camera (option) connected to
the WJ-NT204 to any of 8 preset positions.
(Z)
To register preset positions refer to the CAMERA
SETUP MENU on page 91.
CD ALARM LIST
Camera video input before and after alarm input can
be temporarily stored in the internal memory of the WJ- CD
NT204.
For alarm display see ALARM LIST on page 78.
(D ALARM RESET
Click this to reset the activated alarm mode. The alarm
information will disappear in the STATUS window.
(D CAMERA PRESET REGISTRATION
Preset registration can be made for the Combination
camera connected to the WJ-NT204 as follows.
While displaying the desired image position, select the
position number, then press the SET button.
PAN/TILT
Click on any of the pan/tilt buttons: Up, Down, Right or
Left to move the pan/tilt head of the Combination cam­
era to the desired direction. Click the button repeatedly
as necessary not holding down it.
ZOOM
Click the button to zoom in or out. instead holding
down the button, click on it repeatedly as necessary.
TELE: Zooms in the image.
WIDE: Zooms out the image.
FOCUS
Click NEAR or FAR to adjust the focus of the image
manually. Instead holding down the button, click on it
repeatedly as necessary.
NEAR: Manual focusing
FAR: Manual focusing
AUTO: The built-in focus mechanism performs in the
Combination camera.
76