Computer requirements, Lan type connection, Direct connection to a pc without hub – Panasonic WV-CU20 User Manual

Page 66: Connection to a client pc via hub, B computer requirements ■ lan type connection

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Computer Requirements

OS: Windows98, 98SE/Windows NT4.0/Windows2000 or Windows ME

Note: Windows95 are not applicable to this system.

WWW browser:

Internet Explorer Ver. 5.0 or higher

Netscape Navigator Ver. 4.7 or higher except Ver. 6.0 series

Display resolution: 800 x 600 pixels or more

CPU clock: 500 MHz or more

Memories: 128 MB or more
Network Interface Card: 10/100 Base-T

Video Card
Audio Card is required when using H.323 mode

LAN Type Connection

The figure below shows how the WJ-NT204 can be connected directly to a PC for testing before it is connected directly to a

network. The connection can also be made via a hub.

• Direct Connection to a PC without Hub

Connect the l0Base-T/l00Base-TX port on the PC to the Ethernet port on the WJ-NT204 with a crossover cable.

Combination Cameras (4)

• Connection to a Client PC via Hub

Connect the lOBase-T/IOOBase-TX port on the PC to the Ethernet port on the WJ-NT204 with straight cables via a hub.

Combination Cameras (4)