Wj-nt204 camera select, Input from wj-hd500, Wj-nt204 alarm list – Panasonic WV-CU20 User Manual
Page 122: Alarm reset, Camera preset registration, Camera control buttons, Status window, Image display, D i wn>e, 83li
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Control Operation
Type in the location bar . The 192.168.010 in the URL may vary depending on the WJ-NT204 settings.
Type the identical address to that the WJ-NT204 is set to. The WJ-HD500 OPERATION VIEW window appears.
Cwy^i^A 0 ziu I
K
r
qw
*»
p
: 4twi tr^MVnC f.'e, L1 ^
I Wn>E TEU/ FAJt IJEAP. AUTO CLOSE orni FCEiET ON 83li OFF si < > fid SI H [|p| SI ii' ... "zi sé I © WJ-NT204 CAMERA SELECT These buttons select the input to VIDEO IN 1-4 on the ® INPUT from WJ-HD500 Switches the window from that of WJ-NT204 control to that of WJ-HD500 control. Clicking this opens the 16-button panel on the left win © WJ-NT204 ALARM LIST Displays the alarm list activated on the WJ-NT204. © ALARM RESET Resets the alarm mode activated on the WJ-NT204. © CAMERA PRESET REGISTRATION Registers the presently displayed image position of the camera directly connected to the WJ-NT204. Manipulate the camera to the desired position, then © Camera Control Buttons These buttons control the combination camera desig nated with WJ-NT204 CAMERA SELECT button for © Status Window Displays information when an alarm is activated on the WJ-HD500. © Image Display Displays the live camera image or playback image on the WJ-HD500. 122
WJ-NT204 to display it in the Image Display area.
dow enabling the input selection to the video WJ-
HD500, and the control panel for operating the WJ-
HD500 on the bottom center.
select the preset number with the pull-down button.
Click the SET button to register the position.
pan/tilt, zoom, focus and auto-pan.