Camera select, Alarm list (wj-nt204), Alarm reset – Panasonic WV-CU20 User Manual

Page 120: Hd100 alarm liston, Camera preset registration, Camera control buttons, Status window, Image display, Rev-play, Prev frame

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

© CAMERA SELECT

These buttons select the input image supplied to

VIDEO 1-4 on the WJ-NT204 transmitter. The selected

image appears in the Image Display area of the win

dow.

® AUX

Selects the AUX IN image supplied by WJ-HD100 while

opening the HD100 control panel on the bottom center
of the window.

© ALARM LIST (WJ-NT204)

Displays the alarm list activated on the WJ-NT204

transmitter.

® ALARM RESET

Resets the alarm mode activated on the WJ-HDIOO.

® HD100 ALARM LISTON

Displays the alarm list activated on the WJ-HDIOO

while opening the alarm control panel.

® CAMERA PRESET REGISTRATION

Preset registration can be made as follows.

While displaying the desired image position, select the

position number, then press the SET button.

This panel disappears when the AUX button is clicked,
and resumes when any of CAMERA SELECT 1-4 is
clicked.

® Camera Control Buttons

Controls the combination cameras selected with CAM

ERA SELECT button.

® Status Window

Displays information when an alarm is activated on the

WJ-HDIOO.

® Image Display

Displays the playback image or the WJ-HDIOO.

VAKlAliUiPLAV

SLOW

VAKlAHLEPLAV

FAST

, '

LJl О

® REW

Rewinds the recorded image on the WJ-HDIOO to the

start position.

® REV-PLAY

Plays back the recorded image reversely.

© PREV FRAME

Returns the frame one step to the previous while paus
ing.

© PAUSE

Pauses the playback image.

® NEXT FRAME

Forwards the frame one step to the next while pausing.

© PLAY

Plays back the recorded image.

© FF

Fast-forwards the recorded image on the WJ-HDIOO to

the end position,

© VARIABLE PLAY SLOW

Slows down the speed when playing back the image

normally, or speeds up when playing reversely.

Increases the speed when playing back the image nor

mally, or slows down when playing reversely.

Stops playbacks including REV, REW and FF playback.

© REC

Starts recording.

REC STOP

Stops recording.

Retrieves the recorded image data designated by the

entered time and date. Type in a 14-digit number com

prising YYYYMMDDhhmmss, then click GO button to

access to the data.

Playback starts from the designated point when the

data was found, or starts from the closest point
ascending from the designation when not found.

Mgii

ili

Moves the cursor up or down while displaying the WJ-
HDIOO ALARM LIST to select a recorded event in the

list.

PLAY/SET

Starts playing back of the image designated with the
cursor when the alarm list is displayed.

Resets alarm data when DATA CLEAR is highlighted.

120