Wj-nt204 control panel, Wj-hd500 control panel, 0) camera control – Panasonic WV-CU20 User Manual
Page 123: Multiscreen select, List thumbnail, Q) alarm reset, Wj-hd500 control buttons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
gssxns
i |::>j|jcfc:;T>^;,:::^V^::^^:^^
^ jfe -0 '!
‘ij^' i;:
® WJ-NT204 CONTROL PANEL
Switches the whole of the window back to that of WJ*
NT204 control from that of WJ-HD500 control.
® WJ-HD500 CONTROL PANEL
Switches the control panel on the bottom center of the
window from the camera control to the WJ-HD500 con
trol. The WJ-HD500 control panel is replaced with the
camera control panel when any of the 16-button (CAM
ERA CONTROL) is clicked.
(
0
)
CAMERA CONTROL
Selects the camera input to the WJ-HD500 to display
the image in the window. On the bottom center, the
control panel changes from the WJ-HD500 control to
the camera control.
® MULTISCREEN SELECT
Selects a multiscreen pattern for live or playback image
each time this button is clicked as follows.
screen segments
LIST THUMBNAIL
Displays the index of the recorded image in a list or
thumbnail format. Clicking this button toggles the for
mat between list and thumbnail. The control panel for
list and thumbnail appears on the bottom center of the
window. Refer to page 126.
(Q) ALARM RESET
Resets the alarm mode activated on the WJ-HD500,
and stops the alarm recording.
@ WJ-HD500 Control Buttons
These buttons control the WJ-HD500
Recorder, Refer to page 125-126.
Hard Disk
123