Dynojet WinPEP 7 - Manual (Page 96)

WinPEP 7 User Guide
C H A P T E R 6
MakeRun Options
6-26
G AUGE C ONFIGURATION
The Gauge Configuration window lets you view and edit the common properties of
all the gauges at one time in one place. Gauge Configuration is available only in
Advanced Mode and only when you are in Edit Mode.
Select Tools
! MakeRun Options ! Gauge Configuration.
Figure 6-26: Gauge Configuration
D YNO P ORT
The Com Port (or communications port) lets you choose the com port the dyno
electronics will use. Select Tools
! MakeRun Options ! Dyno Port and choose the
com port. If you do not know the correct port, use the Find Dyno Electronics
feature. Refer to “Connecting the Dyno Electronics” on page 3-11 for more
information.