Dynojet WinPEP 7 - Manual (Page 130)

WinPEP 7 User Guide
A P P E N D I X D
Viewing Data
D-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIEWING DATA
Once the analog channel is configured, the information will automatically be
recorded when you make a run.
1
Make your dyno run. Refer to the dyno installation and WinPEP 7 manuals for
more detailed information on making a run.
2 By default, a graph of your run will appear. In order to view the analog channel
data recorded, you will need to configure your graph to show the analog channel.
C ONFIGURING THE G RAPH
Once the run is graphed, you can configure the graph to show the analog channel(s)
using the axis selection buttons.
For more detailed information on configuring graphs, refer to “Graph Options” on
page 7-5.
1
Click on any of the three axis channel labels.
Note: Available channels may differ depending on your dyno model and
configuration.
2 Choose the analog channel from the list.
Figure D-7: Configuring the Graph Screen
axis channel
label
axis channel
options-analog
channels