Saving and loading sensor tables – Dynojet WinPEP 7 User Manual
Page 127

A N A L O G C O N F I G U R A T I O N
Analog Channel Configuration
Version 2
WinPEP 7 User Guide
D-5
S
AVING
AND
L
OADING
S
ENSOR
T
ABLES
Commonly used sensor tables may be saved to a file allowing you to load and use
them later.
1
Click Save Sensor Table to save the sensor table to a file.
2
Choose a location and click Save.
3
Click Load Sensor Table to load a saved sensor table.
4
Click OK to load the sensor table or click Cancel to abort the changes and return
to the MakeRun screen.
Figure D-5: Analog Configuration Window—Save and Load Sensor Tables
load sensor
table
save sensor
table
This manual is related to the following products: