Dynojet WinPEP 7 - Manual (Page 49)

G E T T I N G S T A R T E D W I T H W I N P E P 7
Exploring the MakeRun Screen
Version 2 WinPEP 7 User Guide
3-15
E XPLORING THE M AKE R UN T OOLBAR
The MakeRun toolbar is a collection of buttons allowing quick access to commonly
used MakeRun features. A description of the toolbar buttons and functions follows.
Status Bar The area that contains run messages and warnings.
Indicator Lights A set of lights which may be illuminated depending on the
current action. For example, when you are sampling, the
green light is illuminated. Green is Sampling, yellow is
Load Control, and red is Brake.
Sampling Timer The area displaying the duration of the run. The sampling
timer starts when a run is started and stops when the run
is ended.
press this button to
Open the MakeRun Configuration dialog box.
Turn on Gauge editing and open the Gauge toolbar.
Automatically start and stop a run.
Enable Load Testing.
Start/stop sampling. This button corresponds to the
green button on your pendant and Enter on your
keyboard.
Start/stop Load Control. This button may be disabled
if your dyno does not support load control. This
button corresponds to the letter L on your keyboard.
Turn on/off the brake. This button corresponds to the
red button on your pendant and the Spacebar on your
keyboard.
screen element function