Dynojet WinPEP 7 - Manual (Page 125)

A N A L O G C O N F I G U R A T I O N
Analog Channel Configuration
Version 2 WinPEP 7 User Guide
D-3
7 Choose a sensor from the drop down list.
8 Click OK.
Figure D-2: Analog Sensor Helper Window—Choose a Sensor
9 Enter the analog channel name in the Display Name field.
10 Click OK to enter these changes or click Cancel to abort the changes and return
to the MakeRun screen.
Figure D-3: Analog Configuration Window—Enter the Display Name
sensor drop
down list
display name
field