Starting winpep 7, Winpep’s screens, Winpep’s screens -2 – Dynojet WinPEP 7 User Manual
Page 36

WinPEP 7 User Guide
C H A P T E R 3
Starting WinPEP 7
3-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING WINPEP 7
You can start WInPEP 7 two ways: by double-clicking the desktop icon or by selecting
Start
!
All Programs
!
WinPEP 7
!
WinPEP 7.
When WinPEP starts, the Graph View, shown in Figure 3-21 shows by default.
W
IN
PEP’
S
S
CREENS
WinPEP’s two screens are:
• the Graph View screen
• the MakeRun screen.
Icons at the left of the
let you switch from the Graph View screen to the
MakeRun screen.
The Graph View screen is optimized for displaying your dyno runs graphically.
The MakeRun screen lets you connect with your dyno electronics to sample and store
dynoruns. Refer to “Exploring the MakeRun Screen” on page 3-14
Note: The MakeRun screen is only accessible if you are using WinPEP as a dyno
control system. The MakeRun button and the MakeRun screen will not be visible
when the software is used exclusively as a run viewer.