Torque cell calibration, Analog configuration – Dynojet WinPEP 7 User Manual
Page 94

WinPEP 7 User Guide
C H A P T E R 6
MakeRun Options
6-24
T
ORQUE
C
ELL
C
ALIBRATION
Select Tools
!
MakeRun Options
!
Torque Cell Calibration to begin Torque Cell
Calibration. Refer to Appendix A for more information.
Figure 6-22: Torque Cell Calibration
A
NALOG
C
ONFIGURATION
Select Tools
!
MakeRun Options
!
Analog Configuration to open the Analog
Configuration dialog box. Refer to Appendix D for more detailed information.
Figure 6-23: Analog Configuration
This manual is related to the following products: