Achronix ACE Version 5.0 User Manual
Page 27
Editors
Chapter 3. Concepts
OD [0,1,2,3] Phase Adjustment Pages
The Output Divider (OD) Phase Adjustment pages contain configuration information about the potential
phase adjustment performed in an OD for one of the PLLs clkout signals. This page will only be visible
when the associated
Output Divider [0,1,2,3] Pages
are enabled, and the setting ”Enable OD[0-3] Phase
Adjustment” is selected. There is potentially one of these pages associated with every OD, so there will be
between zero and four of these pages for a given IP configuration.
Figure 3.7: IP Advanced PLL Editor OD0 Phase Adjustment Page
15
UG001 Rev. 5.0 - 5th December 2012