Achronix ACE Version 5.0 - Manual (Page 200)

Dialogs Chapter 3. Concepts
New IP Configuration Dialog
The New IP Configuration dialog helps users create a new IP configuration file ( .acxip ). After indicating
a name and location for the configuration file, click Finish to create the file and open the relevant IP
Configuration Editor . See also: Creating a New IP Configuration .
Figure 3.102: New IP Configuration Dialog
New IP Configuration Dialog Fields
Field Description Default
Available IP Lists the available IP blocks by FPGA
family.
Description Provides a description of the IP block.
Directory The location in the file system where the
configuration file will be created. Users
can either type the new location or
browse to select a file system location for
the new configuration. (current active project directory)
File Name The name of the new configuration file to
be created. new < unique number > .acxip
Add to active
project
This check box allows the IP
configuration file to be added to the
current project. This option is only
available if a project is active. Enabled
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 188