Metrohm 792 Basic IC - Manual (Page 87)

4 Operation
792 Basic IC
78
Event Events for alarm stop:
Pump stop Pump stopped because pressure limits are ex-
ceeded.
Hardware error Hardware error detected at the 792 Basic IC
(high-pressure pump, injection valve, or sup-
pressor not working correctly).
Power on Temporary power failure at the 792 Basic IC.
4.3.7 System state window
The SYSTEM STATE window is automatically opened if a system is
opened. It shows status and error messages for this system. Messages
concerning the 792 Basic IC hardware are followed by [792 Basic IC] ,
messages concerning the loaded system are followed by ["folder"]
(name of subfolder containing the system file).
Status messages
Checking on-line Checking connection between PC and 792 Basic IC.
On-line Connection between PC and 792 Basic IC ok.
UploadStartupValues System startup values have been loaded to the 792
Basic IC.
Initialization Hardware or system initialization.
Ready System is ready for starting a new determination.
Starting Starting program or chromatogram data acquisition.
Running Running program or chromatogram data acquisition.
Running program
(xxx min left) Running time program
(in brackets: time left).
Waiting for INJECT Waiting for "INJECT" to start program and/or
chromatogram data acquisition.
INJECT done Injection valve has been switched to the "INJECT"
position.
Finished Determination has been finished.
SHUTDOWN 792 Basic IC hardware is shutdown