Metrohm 792 Basic IC - Manual (Page 28)

2.5 Connection to the PC
792 Basic IC
19
2.5 Connection to the PC
2.5.1 Connecting cable
Always switch off 792 Basic IC and PC before you connect the two
instruments with the 6.2134.100 Cable.
Connect the RS232 interface 14 14 14 14 at the 792 Basic IC to one of the serial
COM ports at the PC using the 6.2134.100 Cable (9 pin/9 pin). If only a
25-pin COM interface is available on the PC then the optionally avail-
able 6.2125.110 Cable (9 pin/25 pin) or a commercially available
adapter must be used.
2.5.2 Software installation
The PC program «792 Basic IC 1.0» is required for the operation of
the 792 Basic IC; this is contained on the 6.6045.003 CD included in the
accessories. This program runs under Windows 95, Windows 98, Win-
dows NT and Windows 2000 operating systems and is installed as fol-
lows:
1 Install program
x Insert 6.6045.003 Installation CD into CD drive.
x Select
and Run . Browse for the setup.exe file on the
installation CD and click on .
x Click on " 792 " and follow the instructions given in the setup
program.
The software package will be installed in the desired direc-
tory. In addition to the program files, the following folders are
installed:
Data Folder for storage of chromatogram files
(
*.chw
) and batch reprocessing files (
*.bar
)
Devices Folder for storage of device files ( *.dev )
Methods Folder for storage of method files ( *.mtw )
Reports Folder for storage of report files ( *.txt )
and graphic files ( *.wmf )
Systems Folder with subfolders with system files
( *.smt ).
2 Registrierung
x Please send us your 8.792.8007 Registration card as soon as
possible. Only registered users will get updated program ver-
sions at a special price.