Metrohm 792 Basic IC - Manual (Page 126)

4.4 Methods
792 Basic IC
117
type The types of components are designated by a
one-letter code:
R Reference component (used for peak identifica-
tion).
S Standard component.
C Calibration standard in the case it is different
from the quantification standard.
? Some points of corresponding peak are out of
ADC or detector range – suspicious result.
! Component concentration is outside of mini-
mum ( min C ) and maximum limits ( max C ), set in
the component table.
p Special component (it has one of the special
flags checked on in the COMPONENT window).
N The component response is outside of cali-
brated region.
In the case of peaks additional letters precede
the component type information, indicating,
how peaks are separated from other peaks, for
example:
BD_ Peak that starts on the baseline ( B ) and ends
on the drop line (
D
) that separates it from an-
other adjacent peak.
BBR Special case of a rider ( R ) peak that is tangen-
tially separated from the main one. A main peak
will have a third letter H (horse) in this case.
The complete component type may look like:
BBD : !R .
group
Number of the group for the component.
spectral ratio Not used for 792 Basic IC.
name
Name of the component.
file name File name of chromatogram. This column is
very useful for processing of exported data.
ident Title (identifier) for the chromatogram. This col-
umn is useful for the processing of exported
data.