Metrohm 792 Basic IC - Manual (Page 118)

4.4 Methods
792 Basic IC
109
Calibration defaults Calibration parameters defined in the compo-
nent window and on the Math tab of the Method
setup window.
CALIBRATION
Method: External standard
Response: Area
Standard: No
IDENTIFICATION
Reference peaks: Height
Other peaks: Time
Retention units: min
Component table Component table.
COMPONENT TABLE
No Retention Window% RF Conc. Index Type Group Name
1 4.05 5.0 1.660e+00 0.06 0.000 0 fluoride
2 5.01 5.0 2.735e+00 9.09 0.000 S 0 chloride
3 5.82 5.0 4.137e+00 0.00 0.000 0 nitrite
4 6.63 5.0 6.027e+00 0.00 0.000 0 bromide
5 7.74 5.0 4.763e+00 8.74 0.000 0 nitrate
6 11.67 5.0 9.164e+00 0.00 0.000 0 phosphate
7 13.20 5.0 3.449e+00 6.58 0.000 0 sulfate
Calibration results Calibration results of the component window.
For each component a new page with calibra-
tion results and calibration curve is put out.
CALIBRATION OF COMPONENT chloride
Method: Anion1.mtw
Equation: Q = - 0.0022434·A^2 + 2.73542·A
RSD: 0.072 %
Correlation coefficient: 0.999709
K3 = 0 K2 = -0.0022434 K1 = 2.73542 K0 = 0
Base: Area
Ref.channel: Cond
ISTD:
Formula: Y=K2·X^2+K1·X
Weight: 1
Level Height Area Conc. Vol/Dil Retention Used File
1 0.6004 7.311 1 20 5.013 Yes k4101634.chw
2 3.092 37.74 5 20 5.013 Yes k4101653.chw
3 14.64 169.9 20 20 5.013 Yes k4101712.chw