Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 94)

Chapter 6 Understanding Parameter Sets
94 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
Reason Code. The top N parameter was set to Top, 3, of field
Event Reason Code, using
Event Count.
When querying for the dataset, each work cell could have a large
number of reason codes. They could also have some reason codes in
their own top 3, but not part of the overall top 3 for all work cells in
the query.
The Top N feature will first determine the top 3 reason codes for all
work cells in this example. Once those top 3 reason codes are
determined, the query or queries used to generate the report will
include a filter to limit the data to these 3 reason codes across the
entire report.
The Terminology parameter on the Parameters page allows you to
apply a domain terminology set to your report's parameter set.
To view a report with an applied terminology set:
1. In the Report Expert toolbar, click Parameters to display the
Parameters page, if it is not already displayed.
2. In the Select Report field, select a report template for the
report.
3. In the Parameter Set field, select a parameter set.
4. Expand the Terminology parameter and then select a
terminology set.
Using the Terminology
Parameter