Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 68)

Chapter 5 Understanding Report Templates
68 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
The bar chart fields:
State Count chart fields:
Item Description
Value State Count
X axis grouping First non-page grouping parameter
Series Second non-page grouping
Total Duration chart fields:
Item Description
Value Total Duration
X axis grouping First non-page grouping parameter
Series Second non-page grouping
The Throughput report template allows you to assess the
performance of a machine as compared to its ideal cycle time. The
ideal cycle time will depend upon the product being produced and is
measured in units of seconds per part.
Query: Performance.
The fields of the report template grid:
Item Description
Total Parts The total number of parts produced.
Running Time The number of seconds the machine was in a running state.
Realized Cycle Time The actual amount of time it took to produce a part. This value is a
ratio of running time to the total number of parts produced. The
calculation for this field is:
RealizedCycleTime = RunningTime / TotalParts.
Throughput