Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 120)

Chapter 8 Editing Event and Production Data
120 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
• Monitored Formula Low to High.
• Monitored Formula High to Low.
• Monitored Expression Low to High.
• Monitored Expression High to Low.
• Monitored value.
• Manual active/inactive event.
• Manual monitored continuous event.
To edit the start/end time:
1. Select the Edit Events operation and the desired parameter
set, and then click View Data.
TIP
Alternatively, select the Enter Data Manually operation and
the desired parameter set, and then click View Data. In the
Select Area and Shift Details panel, click Events.
The data is displayed in the Event list panel.
2. Under Actions, click Edit in the row with the event that you
want to edit.
The Start Time and End Time fields become editable.
3. In the Start Time and End Time fields, modify the start/end
time of the event.
NOTE
If you try to edit the Start Time and End Time of an event for
which the configuration restrictions are not fulfilled, a warning
message appears.
4. Click Save to save the modified start/end time.