Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 156)

Chapter 9 Administering Report Expert
156 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
To copy a parameter set:
1. In the Select Parameter Set list, select the parameter set that
you want to copy.
2. Click Copy.
The name of the copied parameter set is appended with a "-
copy" suffix.
3. In the Parameter Set Name text box, type a name for the
parameter set.
4. Modify the parameter set. See "Using the Parameter Set
Controls (page 77)" for details.
5. Click Save.
The new parameter set appears in the Select Parameter Set
list.
NOTE
The name of each parameter set must be unique. When you add, modify
or copy a parameter set, the name you specify must not be identical to
the name of any parameter set that already exists. If it is identical, you
will be prompted with an error message Parameter set name not
unique.
NOTE
If you modify a parameter set, your changes may affect the reports that
use the parameter set, including reports already saved in the Report
Explorer.
To modify a parameter set:
1. In the Select Parameter Set list, select the parameter set you
want to modify.
2. Modify the parameter set. See "Using the Parameter Set
Controls (page 77)" for details.
3. Click Save.
To save the modified parameter set under a new name, click
Save As.
Modifying Parameter Sets