Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 163)

Administering Report Expert Chapter 9
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 163
NOTE
If you delete a terminology’s default culture, you will delete the entire
terminology.
To delete a culture from a domain terminology:
1. Under Terminology Editor, in the Terminology list, select a
domain terminology containing the culture that you want to
delete.
2. In the Culture list, select the culture that you want to delete.
3. Click Delete Culture.
4. Confirm the deletion in the message box that appears. This
action cannot be undone.
NOTE
If you want to make the new terminology and terminology
changes available to Report Expert users, you need to
synchronize them. See "Synchronizing Terminology Changes
with Report Server (page 163)".
After you create new or modify existing terminologies, you need to
synchronize the terminology changes with the report server. Once
synchronized, the changes will be available to users in Report Expert.
To synchronize terminology changes, click Sync IIS With New
Terminology at the bottom of the terminology editor.
If you want to refresh terminology every time you select a report
template and generate a report, check Init terminology every
report.
NOTE
Selecting the Init terminology every report option consumes
additional resources every time you generate a report, so we
recommend that you select this option only if you are making frequent
terminology changes.
If you do not select the option, terminologies are refreshed when you
launch Report Expert.
Deleting Cultures from
Domain Terminologies
Synchronizing Terminology
Changes with Report Server