Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 139)

Administering Report Expert Chapter 9
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 139
Use this setting: To modify:
ColorNormal The color used in the OEE% chart. This color will signify a
moderate value of OEE%, above the number set in the
ThresholdLowNormal field, but below
ThresholdNormalBest.
DataReaderTimeout The wait time in seconds before an attempt to run a
standard DPE query is terminated and an error is logged. If
this setting is blank, the default of 120 seconds is used.
Performance note: Increasing this setting’s default value
will cause Report Expert to wait for a longer period before a
database query times out and the report fails. This may be
necessary if certain reports time out with the default
settings.
DataSetTimeout The wait time in seconds before an attempt to access the
database is terminated and an error is logged. If this setting
is blank, the default of 120 seconds is used.
Performance note: Increasing the default value of this
setting will cause Report Expert to wait for a longer period
before a database query times out and the report fails. This
may be necessary if certain reports time out with the default
setting.
EventDetailRowLimit The maximum number of rows to be taken from the
database when the EventDetail query is executed for the
Event Detail report.
The default value for this setting is 5000.
If the value you type for this setting is exceeded in a
generated report, the Max row limit reached message
appears in the resulting report.
If this setting is blank or set to 0, the parameter has no
effect. See "Event Detail (page 49)" for more information.
Performance note: This setting limits the size of the
dataset included in the report. Lower numbers result in
faster reports. However, lower numbers may also result in
incomplete reports if the limit is exceeded. Therefore, the
setting is a trade-off and depends upon how much data is
needed for the Event Detail that uses the EventDetail query.
The setting does not have any impact on reports that use
queries other than EventDetail.
EventDetailExtRowLimit The maximum number of rows to be taken from the
database when the EventDetailExt query is executed for the