Northern Connectors Harting DIN 41 612 Connectors - Manual (Page 199)

30
.
03
To
ol
in
g
Handling indications
When setting up an assembly machine it is not
necessary to set the working height of the press
and adjust the base plate more than once. There
is no need for further adjustments. All the other
adaptations for various applications are performed
efficiently and are reliant by various combinations of
individual modules.
Positioning the bottom tool in relation to the
top tool
The ram of the HARTING press is generally provided
with a cross-shaped groove which accurately
positions the top tool in steps of 90°.
Two guide pins position the bottom tool in relation to
the top tool simply and accurately.
These guide pins cannot be used for positioning
the pcb or the connector!
Two pairs of pins on the base plate locate the bottom
tool in relation to the top tool in steps of 90°.
Height compensation
●
Various overall heights of connectors are accommodated
by type-specific top tools.
●
Various pcb thicknesses are accommodated by the
use of spacers between the bottom tool and base
plate.
Ram with cross-shaped groove
Positioning the bottom tool in relation to top tool
Base plate with pairs of location pins at 90°