Lenze EVS9332xS - Manual (Page 373)

Appendix
Index
13
13.2
l
13.2−4 EDSVS9332S EN 6.0−07/2013
Mechanical installation
− Cold plate technique, 4.1−4, 4.2−4
− Standard mounting 45 kW, 4.3−2
− Standard mounting 55 ... 75 kW, 4.4−2
− thermally separated (push−through technique) 15 ... 30
kW, 4.2−3
− Thermally separated mounting (push−through technique)
45 kW, 4.3−3
− Thermally separated mounting (push−through technique)
55 ...75 kW, 4.4−3
Menu structure, XT EMZ9371BC keypad, 7.2−12
Message, 8.2−1
Mobile systems, 5.2−4
Monitoring, 8.2−1
− bus off, 8.2−3
− configuring, 8.31
− Current load of controller, Ixt monitoring, 8.2−5
− current load of the motor, I2 x t monitoring, 2.2−1, 8.2−7
− DC−bus voltage, 8.2−11
− Earth fault in motor cable (OC2), 8.2−4
− Exceeding of the maximum speed (NMAX), 8.2−4
− External error (EEr), 8.2−11
− Failure of a motor phase (LP1), 8.2−4
− Heatsink temperature, 8.2−10
− Monitoring times for process data input objects, 8.2−3
− motor cable overcurrent (OC1), 8.2−4
− motor temperature, 8.2−6
− possible responses, 8.31
− reset node, 8.2−3
− responses, 8.2−1
message, 8.2−1
TRIP, 8.2−1
warning, 8.2−1
Monitoring functions
− Motor temperature, 2.2−1
− Overview, 8.31
− responses, 8.2−1
Monitoring times for process data input objects, 8.2−3
Motor, thermal monitoring, with PTC thermistor, 6.5−14,
6.5−15
motor, Thermal monitoring, Sensorless, 2.2−1
Motor cable, 5.2−8, 5.3−1
− Cable cross−section, 5.2−9
− for trailing cable, 5.2−9
− Influence of the length, 5.2−8
− length, 3.1−2
− max. length, 5.2−7
− permanently installed, 5.2−9
− permissible length, 5.2−8
− Specification, 5.2−8
Motor cable overcurrent (OC1), 8.2−4
Motor connection, 3.1−2
Motor monitoring, 2.2−1
motor pot, 8.4−12
Motor protection, 2.3−2
Motor stator resistance, 8.4−6
Motor temperature, monitoring, 8.2−6
Motor type selection, 8.4−6
Mounting conditions
− Dimensions, 3.1−2
− Free spaces, 3.1−2
− Mounting place, 3.1−2
− Mounting position, 3.1−2
− Weights, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
N
Nameplate, 1.1−3
Network of several drives, Function, 10.1−1
Noise optimised operation, 8.4−3
Notes, definition, 1.4−1
O
Operating conditions, 3.1−1, 7.2−1
− Ambient conditions
Climatic, 3.1−1
Mechanical, 3.1−2
− ambient conditions, electrical, 3.1−2
− Mounting conditions
Dimensions, 3.1−2
Free space, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
Weight, 3.1−2
Operating mode of the motor control, 8.4−2
Operating status, display, 9.2−1
Operation, at earth−leakage circuit breaker, 5.2−3
Operation on public supply systems, EN 61000−3−2, 5.2−1
Optimisation of the controller and mains load, 5.2−5
Output signals
− Analog, Configuration, 6.9−4
− Digital, Configuration, 6.9−2
Outputs
− Analog, 6.9−4
− Digital, 6.9−2