Lenze EVS9332xS - Manual (Page 12)

Preface and general information
How to use this System Manual
Information provided by the System Manual
1
1.1
1.1.1
l
1.1−1 EDSVS9332S EN 6.0−07/2013
1.1 How to use this System Manual
1.1.1 Information provided by the System Manual
This System Manual addresses to all persons who dimension, install,
commission, and set 9300 servo inverters.
Together with the System Manual (supplement), document number
EDSVS9332S−EXT, and the catalogue, it provides the basis for project
planning for the mechanical engineer and the plant constructor.
The System Manual provides the basis for the description of the 9300 servo
inverter. Together with the System Manual (supplement), document
number EDSVS9332S−EXT, a complete System Manual is available:
ƒ The features and functions are described in detail.
ƒ The parameterisation for typical applications is pointed up by the use
of examples.
ƒ In case of doubt always the mounting instructions supplied with
the 9300 servo inverter are valid.
Contents of System Manual Contents of System Manual (supplement)
1 Preface 1 Preface
2 Safety −
3 Technical data −
4 Mounting the standard device −
5 Wiring the standard device −
6 Commissioning −
7 Parameter setting −
8 Configuration 2 Configuration
8.1 Monitoring 2.1 Configuration with Global Drive Control
8.2 Monitoring functions 2.2 Basic configurations
8.3 Code table 2.3 Modes of operation
8.4 Selection lists
8.5 Table of attributes
− 3 Function library
− 4 Application examples
9 Troubleshooting and fault
elimination −
10 DC−bus operation −
11 Safety engineering −
12 Accessories −
13 Appendix 5 Appendix
Target group
Contents