AirLive RS-2500 User Manual
Page 9

1. Introduction
3
A
irLive RS-2500 User’s Manual
Chapter 14 Application Blocking: You can select the application type and
software, and enable to block those applications at Policy.
Chapter 15 Virtual Server: When you install server in LAN and allow Internet
users accessing, you should define the Virtual Server function.
Chapter 16 VPN: This chapter is an introduction for IPSec and PPTP server. You
can read next chapter to know how to configure them.
Chapter 17 Configuration Example - IPSec & PPTP VPN: We list several
examples for the VPN connection, and you can find the one and refer to the
example to configure your own setting.
Chapter 18 Policy: It is recommended to read this chapter, because it is the most
important setting for RS-2500. No matter how you configure QoS, VPN, or else
function, you have to enable them at Policy setting.
Chapter 19 Configuration Example - Policy Setting: We list several Policy
setting for your reference, and you can know better how to configure it.
Chapter 20 Web VPN / SSL VPN: This chapter will explain you the Web VPN /
SSL VPN function, and we also list the example for your reference about how to
configure it.
Chapter 21 Anomaly Flow IP: This chapter is an introduction to tell user how to
configure RS-2500 for the protection from being intrusion by the known malware.
Chapter 22 Monitor:
22.1 Log: Display kinds of log records for user’s reference.
22.2 Accounting Report: Display the calculation of Internet access result per
Source IP, Destination IP, and Service.
22.3 Statistic: Display WAN or Policy Statistic result for user’s reference.
22.4 Diagnostic: RS-2500 offers Ping and Traceroute tools to diagnostic
connection’s status per WAN, LAN, DMZ, or VPN.
22.5 Wake On Lan: This chapter is an introduction about the Wake On Lan
function, so Internet user can wake on LAN PC.
22.6 Status: You can find out the real-time status about Interface,
Authentication, ARP table, and DHCP Clients.